These are custom high performance compression springs. If you would like your bindings to have a softer feel, you can adjust the main pivot location, or you can remove one spring from each binding. Comes in a pack of four pre-lubed springs.
Compatible with the original Bishop 1.0 and Bishop 2.0 bindings
This is a two page PDF mounting template that you can download and print on two standard 8.5 by 11 inch sheets of paper. You can also add it to your cart as a digital download for free.
Make sure and DO NOT scale this pdf when you print it. This is critical. Choose the 100% scale, or Do Not Scale option when printing. Otherwise, your gonna have a bad day trying to mount these babies. This template has 1 inch and 1 cm scale lines to check to make sure you have printed it correctly. You will need to cut the second page, and then carefully line up the two pages and tape them together to use it. Click here to download for free, without having to go through the shopping cart.
These are the special low profile screws used to mount the Bishop Binding Baseplates to the ski. Comes in a pack of 10 - enough for one Baseplate and a Base Rail or . You will need to buy two packs for a full binding set or a Switch Kit.
Compatible with the original Bishop 1.0 binding, Bishop 2.0, and BMF bindings
These simple to use climbers come in a low and high version for either 7 or 14 degrees of calf-saving heel rise for the steeps. They can be used independently, so you don't need to put one down to use the other. Keep the low one up when you flip up the big boy, then flip down the high climber and the low one is ready. Sold as a set of two.